HAIRDRESSING MINIMUM - HAIR CUTTING TOOLS

Hairdressing, like no other, depends on the quality of the tool used. This rule applies not only to haircuts, but also to multi-color paints. We will talk about what should be in the arsenal of a master to create a hairdressing masterpiece below. For more references, check out: hair cutting tools

TWO RINGS, TWO ENDS, IN THE MIDDLE OF CARNATIONS

Even a child knows the answer to this riddle, but hairdressers know even more about the mysteries of the world of scissors. In most cases, the master’s arsenal includes several types of scissors.

Straight scissors are used when cutting. From other types they are distinguished by a smooth cutting edge, sharpened by convection or standard method.

Standard sharpening is performed at an angle of 45-50 °, while the cutting edge is in the form of an even strip with a width of 1 mm.

If you are just going to choose your first hairdressing tool, you can recognize scissors with a micro notch by opening and closing it with a tight enough tightness. They will not allow you to make a sliding slice and are suitable only for edging.

Convection sharpening of the blades is performed at an angle of 38-42 °. This method is used by modern manufacturers of hairdressing tools - Kedake, TOKOSHA Ltd., JAGUAR and others.

Convex sharpening can be recognized by the convex shape and thickness of the cutting edge, not exceeding the  thickness of the hair . This form allows you to use scissors for both precise cutting and slicing.

Thinning scissors are divided into two groups depending on the location of the teeth on one or both canvases. If you consider yourself a beginner hairdresser, choose double-sided scissors that cut significantly less hair. However, it is important to consider that the move of such an instrument is more rigid and will require physical strength.


The teeth of thinning shears can be arched or straight. The latter type is more common in low-cost models, for example, Wasabi KAI. In the more expensive models from Kasho, Jaguar and Tondeo, the teeth have an arc shape with a radius equal to the distance from the tooth location to the screw.

Check scissors are suitable for simultaneous cutting and thinning. Structurally, they represent a tool with one straight blade (solid or with teeth) and a second, on which a nozzle with a pattern is put on.

Increasingly, from television screens, in brochures you can hear about self-sharpening knives and scissors, this myth has not passed and the segment of hairdressing tools.

In order to understand the groundlessness of such a promise, it is enough to recall the physical properties of the metal, which make independent sharpening impossible.

Second myth

Laser sharpening is the most effective and high-quality. This statement is relevant when it comes to cosmetology, medicine, radio electronics, jewelry, but not the production of hairdressing tools.

Laser sharpening is often confused with laser hardening. All that a laser can influence is the accuracy of the angle, but not the strength.

There is no diamond sharpening. The term itself has arisen due to the use of a conventional diamond wheel or bar, which has nothing to do with the indestructibility or strength of the surface of the scissors.

TOP 2 sets of tools for auto repair

Despite the fact that the fashion for self-repair of the car is gradually disappearing, as are the garages and garage cooperatives. Many motorists prefer to have in the trunk of a minimum cheap mechanic tool sets that can be useful for minor repairs or just to soothe the soul. But, on the other hand, those custodians of traditions who never trust their “swallow” to any master have yet to be translated into our country.

In any case, people falling into these categories feel the need to own a quality tool kit with an optimal set of devices and, of course, at a reasonable price. We will tell about ten such sets in this article.

MasterTool 78-0315

A hammer, a tape measure, a pliers, a mounting knife and a screwdriver with a set of bits - this is what a standard tool kit looks like, which is useful not only in a car, but also in everyday life, and all that is said about the tenth place holder is MasterTool 78-0315 .

With its help, you are unlikely to be able to repair a car or build a house, but in the absence of another tool and funds to buy a more “volumetric” set, this very budget set will become the first copy in your collection and some kind of magic wand.

For example, a tool kit will help:

unscrew the nut on the terminals of the battery can be using pliers;

With the use of a knife you can unfasten the “caps” or strip the wires;

a screwdriver can also be useful when replacing the battery and tightening the clamps on the nipples;

when dismantling some elements of both the inner and outer skin of the car.

All tools in the MasterTool set 78-0315 are folded into a special case with a convenient handle for transportation, so that there is always a place in the trunk, and you can always take the set with you at home repair.


Intertool ET-6046

If such standard things as pliers, side cutters, a screwdriver, etc., are already in your arsenal, then for the price of a MasterTool 78-0315 set you can purchase a set of rollers, bits and end heads that will be more applicable during car repairs.

Intertool ET-6046 consisting of 46 items, of course, the number of nozzles for gateways is minimal here, and for a complete repair their range will need to be expanded. It would not be superfluous to buy another small ratchet with a ratchet mechanism (“ratchet”) of an average size by 3/8 ”, since the complete“ ratchet ”on ¼ is not always comfortable to work with. By cons Intertool ET-6046 can be attributed to the quality of performance. This set can not be called professional, but when used once a month, it will justify its price.


Life on wheels

“Cars, cars literally flooded everything” - these words from the old song perfectly reflect the reality of European and Italian life. An incredible number of cars scurry along the roads day and night. And what kind of cars! I met Bentley and Porsche on Italian freeways no more than two or three times, but local-made cars are respected and popular. Italians are generally patriotic, and as for Alfa Romeo and Fiat, it is sacred. Of course, travel is not prohibited for foreign brands, but their wheels are nicer to their hearts, and more economical to repair and operate.

A car is not a luxury, but a means of transportation - we always remember this and are not tied to a four-wheeled friend. A machine is a mountain of scrap metal and an appropriate attitude towards it. When parking, you can slightly touch the wing, knock the bumper, or even repel a side mirror. Moreover, not only at his own car, but also at his neighbor in the parking lot. The first time I was literally shocked when the drivers shoved the neighboring cars to get into the free space in the sun on the parking lot. Machines are scratched and not repaired. The usual thing to drive a car with a combat mark.

The car is bought for 5-7 years. All the juice is squeezed out of it: they are driven around the freeways, winding through the mountains, walking the sea, exploited daily in the bustle of the city, and then sell their faithful iron horse with a clear conscience, and they don’t remember the name. Buy and sell used cars in the order of things. There is a huge variety of sites with the classification of cars by brand, year of manufacture, etc. Our friends bought a car and came to see the model that interested them. Under the hood of the hood lay dry leaves and other debris, that is, the owner did not even look there, did not even wash before the visit of a potential buyer. Well, it’s not customary to look under the hood and get your hands dirty, but sometimes you can stand for 2-3 weeks in the queue at the service station. In the end, this is not the only car in the family.

Another car can be bought at the box office. With such agencies there are a kind of salons-shops. It is believed that if the car traveled a certain number of kilometers, then it is better to kill it than to feed it. In the sense that it now needs capital repairs and substantial material investments, it is therefore cheaper to just get rid of it. Such machines, to put it mildly, “killed”, but cheap, but since the factory warranty period has not expired, such machines are on warranty brand maintenance.